Jerry Can Holders

Canister mounts are universal, quick-detachable, rotatable, safe, are used to equip off-road vehicles in extreme conditions. They allow you to fix flat canisters on a flat vertical or horizontal surface — in the cabin or trunk of a car, to the body of a snowmobile, ATV, to a spare wheel.

Polyurethane holders for transporting canisters increase the stability of the canister during transportation, protect it from damage due to vibration and prevent possible leakage of gasoline, water, and other liquids as a result of overturning.

A variety of reliable fasteners-holders for one or two expeditionary canisters Extreme, Rotopax / GKA can be found and bought in our online store. All canister mounts are metal reinforced and covered with wear-resistant polyurethane. They do not damage the fixing surface and the canister itself. Oil and petrol resistant. Not subject to corrosion.

Instant and secure installation / removal

An important point when using expeditionary canisters is the ability to instantly install / remove the canister and the safety of the attachment point when the canister is removed.

Our experts have developed special «T-clamp» secure fasteners for instant installation.

The design of the mounts allows instant installation and removal of the flat canister by simply turning the handle. And when the canister is completely removed, a bolt does not stick out at the mount, which you can run into.

Holders for 1 canister

Universal (for any flat cans)

In our assortment it is possible to buy mounts for all types of flat expedition canisters – Extreme, Rotopax, GKA and others.

Fasteners for a plastic expedition canister Extreme, Rotopax, GKA number 36-20-001 and 36-20-001-1 (with stainless hardware) in their set have a T-shaped clamping handle and one-piece reinforced base.

The versatile models are also suitable for attaching a box in the form of an expedition canister – the RotoPax emergency case.

For canisters Extreme

Extreme canisters have a characteristic recess in the shape of a circle with four small protrusions at the attachment point. Therefore, for the most tight fixation in the sets of holders for Extreme canisters, substrates are provided that repeat this recess in shape — number 36-00-024 (simple pad) and 36-00-014 (pad with an additional recess for the mounting base).

Expeditionary canisters are used to transport fuel and various liquids under extreme operating conditions. To ensure additional safety when transporting expeditionary canisters, we recommend using canister mounts that provide additional clamping force and reduce vibration due to an improved base design.

Canister holder Extreme «T-clamp» catalog number 36-20-002 with T-grip handle, middle part number 36-00-0022 and one-piece reinforced base 36-00-0011. This mount is injury-safe, provides a tight clamping of the canister at the installation site and its removal as quickly as possible – in just one turn of the handle. Visually executed in a laconic minimalistic design.

Mount for the cans Extreme «Wing Nut», catalog number 36-20-010 — with clamping handle-lamb, and a pad (number 36-00-014) with an additional recess for the mounting base 36-00-010.

Economical version of mounts for canisters Extreme

The most simple and affordable sets of fasteners for Extreme canisters include an eight-beam clamping knob, a simple mounting base number 36-00-024 and a set of stainless hardware for mounting.

For open circuit bases. Holder for canisters Extreme «Wing Nut+nut» catalog number 36-20-050 is recommended if it is possible to mount the canister using nuts.

For closed circuit bases. Canister holder Extreme «Wing nut+rivet» number 36-20-051 is recommended for “monolithic” bases, installation is carried out using threaded rivets.

Holders for 2 canisters

For long journeys, it is often required to secure two canisters at once to one place at the same time. In this case, we recommend using specialized fasteners for 2 Extreme canisters number 36-20-052 and 36-20-053 with stainless hardware for mounting. Both models have a clip-on knob and backings number 36-00-024 (simple backing) 3pcs, in shape ideally repeating the typical branded groove at the attachment point for Extreme canisters.

For open circuit bases. Fastening for 2 canisters Extreme «Wing nut+nut, 1 + 1» number 36-20-052 for open circuit bases, installation with nuts.

For closed circuit bases. Fastening for 2 canisters Extreme «Wing Nut+rivet, 1 + 1» number 36-20-053 for monolithic bases, the so-called closed circuit, installation is carried out using threaded rivets.

Color matters

The assortment includes holders of expedition canisters in classic colors — black, blue, green and noticeable orange color.

Metalware

When selecting fasteners for transportation outside the vehicle, we recommend choosing sets with stainless hardware for longer operation. Additionally, it is possible to select and buy hardware products in the section of our website METALWARE.